Smart Battery Charger & Maintainer 10A

Charges and maintains 12V car, AGM and LiFePO4 batteries, with an LCD that shows you what it is doing.

  • 12V · 10A
  • LCD screen
  • Lead-acid, AGM, LiFePO4
$89.99

Pairs well with

4-in-1 Portable Jump Starter & Tire Inflator

Jump-start a dead battery and top up tires without another car

$89.99

Winter is when weak batteries give up. Charge it before the first freeze.

  1. Order todayOct 11
  2. Ships from TexasWith a tracking number
  3. ArrivesDate shown at checkout

Free shipping on this order

VisaMastercardAmexDiscoverApple PayGoogle PayShop Pay

In stock in Texas60 days to send it back.

Free shipping over $60 · ships from Texas
60-day returns, no rush to decide
Secure checkout with Shopify
Replies within 2 hours · hello@oakmend.com
Open hood of a car with a flat battery on a cold morning

7:10 a.m., 18°F

The car clicks and nothing happens.

Batteries lose strength in the cold and drain when a car sits. A smart charger in the garage keeps them topped up so the cold morning is just a cold morning.

In the garage

Charges, then keeps it full.

Charger connected and charging the car battery
Car with a flat battery, hood open
Before · battery left to the coldAfter · charging, then maintaining

Clamped on: the LCD shows voltage and charge level

Why this one

What 10 amps gets you.

12V 10A charger connected to a car battery

10 amps

Enough current to bring a flat 12V car battery back in hours, not days.

Charger maintaining a battery on a workbench

Leave it on

After a full charge it switches to maintaining, so a stored car, boat or mower battery stays ready.

Charger LCD showing full charge

You can see it working

The LCD shows voltage, current, temperature and charge level.

Charger clamped to the battery, charging

How to use

Clamp, pick, walk away.

  1. 1

    Clamp on

    Red clamp to positive (+), black to negative (−), then plug the charger in.

  2. 2

    Pick the mode

    Press MODE to choose Car, AGM, Motorcycle or LiFePO4.

  3. 3

    Walk away

    It charges, then switches to maintaining. Check the screen when you come back.

Before you buy

Is it the right charger?

Check 1

Is it 12V?

Almost every car, SUV and pickup uses a 12V battery. This charger does not do 6V or 24V.

Check 2

What type is it?

Standard lead-acid, AGM or LiFePO4 are fine. Ternary lithium (Li-ion/NCM) is not.

Check 3

Is there an outlet?

It plugs into a 110–120V wall outlet, so park within reach of one.

Reviews

Reviews.

The details

Everything else.

Something we missed? Write to hello@oakmend.com. We reply within 2 hours.

Compare with other kinds
Oakmend 10A smart chargerJump starterBasic trickle charger
Full charge from flatYes, in hoursNo, starts the car onlyVery slow
Safe to leave connectedYes, maintain modeNoOften not
Shows voltage/currentLCDVariesNo
LiFePO4 modeYes—Rarely
Specs and what is in the box
Full name
Smart Battery Charger & Maintainer 10A — 12V with LCD
Output
12V, 10A
Battery types
12V lead-acid (flooded/standard car), AGM and LiFePO4 lithium iron phosphate
Not for
Ternary lithium (Li-ion/NCM) batteries, 6V or 24V batteries
Modes
Car, AGM, Motorcycle, LiFePO4, Pulse repair
Display
Backlit LCD: voltage, current, temperature, charge level
Temperature modes
Summer and winter compensation
Protection
Reverse polarity, short circuit, overcurrent, overvoltage, low voltage, overheat; spark-resistant clamps; fire-resistant shell
Input
110–120V AC, standard US plug
Size
5.59 × 2.91 × 2.05 in (14.2 × 7.4 × 5.2 cm)

In the box

Smart charger with battery clamps
1
User manual
1
Honest limits
  • It does not jump-start a car. It charges the battery; that takes time.
  • 12V only. Not for 6V, 24V or ternary lithium (Li-ion) batteries.
  • Pulse repair helps with light sulfation; it cannot fix a battery with a dead cell or physical damage.
What does Pulse repair do?

It is a mode for batteries with light sulfation from sitting. It can help them take a charge again; it cannot fix a battery with a dead cell or physical damage.

Is it safe if I mix up the clamps?

It has reverse polarity protection, plus short circuit, overcurrent, overvoltage and overheat protection, and the clamps are spark-resistant. Still connect red to positive and black to negative.

Will it work on my car?

It is for 12V batteries: standard lead-acid, AGM and LiFePO4. Almost every passenger car, SUV and pickup uses a 12V battery.

Can I leave it connected all winter?

Yes. After a full charge it switches to maintaining. Check on it now and then, as with any charger.

Does it work on 6V or 24V?

No. 12V only.

Will it charge a completely dead battery?

It can recover deeply discharged batteries that are still healthy. A battery with a shorted cell will not hold charge and needs replacing.

How big is it?

5.59 × 2.91 × 2.05 in.

Can I return it?

Yes, within 60 days, unused and in its original packaging. Write to hello@oakmend.com for the steps. Return shipping is on you unless it arrived damaged, defective or wrong.

How much is shipping?

Free on orders over $60. Below that, a flat $4.99.

Where does it ship from, and when will it arrive?

From our warehouse in Texas, with a tracking number by email when it ships.

How do I pay?

All major cards, Apple Pay, Google Pay and Shop Pay, through Shopify’s secure checkout.

How fast do you reply?

Within 2 hours. Write to hello@oakmend.com and a person answers.

Why buy from Oakmend

A small shop that answers.

Our story

Chosen, not listed

We stock a few tools for the car and the home and turn the rest down. This charger made the cut because it keeps a battery ready without babysitting.

Honest pages

Real specs, real limits, real photos. If something here is missing or wrong, tell us and we fix the page.

Replies within 2 hours

Write to hello@oakmend.com about fit, delivery or returns. A person reads it and replies.

If it doesn’t do its one job, send it back.

  • Ships from TexasTracked, US warehouse
  • 60-day returnsNo rush to decide
  • Free shipping over $60Flat $4.99 below
  • Replies within 2 hourshello@oakmend.com