Right breaker, first try
Signal strength rises as you near the matching breaker; a red LED and a beep confirm it.
Circuit Breaker Finder & Outlet Tester Kit
Plug in, sweep the panel, hear the beep. Then read the outlet’s wiring on the screen.
- Finds breakers fast
- 7 wiring faults on LCD
- NCV + flashlight
Pairs well with
Working on a fixture or an outlet this weekend? Find the breaker before you start.
- Order todayOct 11
- Ships from TexasWith a tracking number
- ArrivesDate shown at checkout
Free shipping on this order
VisaMastercardAmexDiscoverApple PayGoogle PayShop Pay
In stock in Texas60 days to send it back.
Free shipping over $60 · ships from Texas
60-day returns, no rush to decide
Secure checkout with Shopify
Replies within 2 hours · hello@oakmend.com
Saturday, light fixture half off
Which breaker is it?
Panel labels fade and get guessed. Flipping breakers one at a time means resetting clocks and walking back and forth. Plug the transmitter into the outlet, sweep the panel with the receiver, and it beeps at the right breaker first try.
At the panel
Right breaker, first try.
The kit in use: outlet readout, then the breaker sweep
Why this one
Why this kit, not guesswork.
Reads the fault for you
The LCD names the wiring condition and shows live voltage and Hz, instead of three lights and a chart.
More than outlets
Light socket, 3-to-2 prong and alligator clip adapters trace ceiling lights and bare wires too. All of it packs into the molded case.
How to use
Plug, sweep, beep.
- 1
Plug in
Put the transmitter in the outlet (or use an adapter on a light socket or wires).
- 2
Sweep the panel
Run the receiver slowly along the breakers and watch the signal rise.
- 3
Beep, done
The red LED and beep mark the breaker that feeds that outlet.
Before you buy
Will it work in your house?
Check 1
Standard outlets
It is for 90–120V AC household circuits, outlets and light fixtures.
Check 2
Not 240V
Dryer, range and other 240V circuits are outside its range.
Check 3
Lights and bare wires
The light socket and alligator clip adapters in the kit cover those.
Reviews
Reviews.
The details
Everything else.
Something we missed? Write to hello@oakmend.com. We reply within 2 hours.
Compare with other kinds
| Oakmend finder kit | 3-light outlet tester | Flip breakers one by one | |
|---|---|---|---|
| Finds the breaker | Yes | No | Eventually |
| Names wiring faults | On the LCD | Lights + chart | No |
| Shows voltage | Yes, V and Hz | No | No |
| Light sockets / bare wires | Adapters included | No | — |
Specs and what is in the box
- Full name
- Circuit Breaker Finder & Outlet Tester Kit — LCD, 90–120V
- Circuits
- 90–120V AC, 50/60 Hz (standard US household)
- Breaker finding
- Transmitter + scanning receiver with signal strength, red LED and beep
- Outlet test
- LCD names 7 wiring states: correct, open ground, open neutral, missing live, live/ground reversed, live/neutral reversed, live/ground reversed with open ground
- Display
- LCD with live voltage and Hz readout
- GFCI
- GFCI outlet test function
- Extras
- Non-contact voltage (NCV) detection, built-in flashlight
- Adapters
- Light socket, 3-to-2 prong, alligator clip
- Power
- Batteries included
- Storage
- Molded carrying case
In the box
- Transmitter (outlet tester)
- 1
- Receiver (breaker finder)
- 1
- Light socket adapter
- 1
- 3-to-2 prong adapter
- 1
- Alligator clip adapter
- 1
- Batteries
- Included
- Molded carrying case
- 1
- User manual
- 1
Honest limits
- For 90–120V AC household circuits. Not for 240V circuits, DC or car wiring.
- It identifies circuits and common wiring faults; it does not replace a licensed electrician for repairs.
- Turn the breaker off before touching any wiring, even after testing.
How does it find the breaker?
The transmitter plugs into the outlet and sends a signal down that circuit. Sweep the receiver along the breakers: the signal bars rise as you get close, and a red LED and a beep mark the matching breaker.
What wiring faults does it show?
Seven states on the LCD: correct, open ground, open neutral, missing live, live/ground reversed, live/neutral reversed, and live/ground reversed with open ground. It also shows live voltage and Hz.
Will it work in my house?
It works on standard US 90–120V AC household circuits, outlets and light fixtures.
Does it work on 240V dryer or range circuits?
No. 90–120V AC only.
Can it test GFCI outlets?
Yes, the transmitter has a GFCI test function.
Are batteries included?
Yes, they come in the kit.
Does it detect voltage without contact?
Yes. The receiver has a non-contact voltage (NCV) mode and a built-in flashlight.
Can I return it?
Yes, within 60 days, unused and in its original packaging. Write to hello@oakmend.com for the steps. Return shipping is on you unless it arrived damaged, defective or wrong.
How much is shipping?
Free on orders over $60. Below that, a flat $4.99.
Where does it ship from, and when will it arrive?
From our warehouse in Texas, with a tracking number by email when it ships.
How do I pay?
All major cards, Apple Pay, Google Pay and Shop Pay, through Shopify’s secure checkout.
How fast do you reply?
Within 2 hours. Write to hello@oakmend.com and a person answers.
Why buy from Oakmend
A small shop that answers.
Chosen, not listed
We stock a few tools for the home and turn the rest down. This kit made the cut because it answers the one question every panel raises.
Honest pages
Real specs, real limits, real photos. If something here is missing or wrong, tell us and we fix the page.
Replies within 2 hours
Write to hello@oakmend.com about fit, delivery or returns. A person reads it and replies.
If it doesn’t do its one job, send it back.
- Ships from TexasTracked, US warehouse
- 60-day returnsNo rush to decide
- Free shipping over $60Flat $4.99 below
- Replies within 2 hourshello@oakmend.com
